Stems

Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.

Whisky's No.7 Mountain stems offer a stout connection for modern mountain bars. They match the simple, clean aesthetic of other Whisky cockpit components. - Bead-blasted, then anodized, finish - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation

Velo Orange Happy Stem. A polished threadless stem with a 45 degree angle to keep your back and wallet happy. - At least 37mm of steerer is required - Does not require a stem cap. Longer compression bolt included - Not compatible with carbon steerer tubes

Save your steerer tube and eliminate headset spacers with the Velo Orange Tall-Stack alloy stem. It gives your bike's cockpit a nice clean look. Available in Polished or Black, the 17-degree angle allows the stem to be level on most modern frames. And, you can use handlebar clamp shims to adapt to smaller handlebar clamp diameters, if you like. - Stack height: 75mm - Not recommended for use with carbon steerer tubes

TruVativ's Hussefelt is an aggressive DH/freeride stem forged from 6061 aluminum for superb stiffness and superior strength. The short length provides supreme confidence when railing down the sketchiest steeps. Four bolts attach the faceplate for a vise-like grip on your bars, and the 2-bolt clamp secures to your steerer for pinpoint steering precision and stiffness.

The Treymone stem features a 51mm reach and a 27mm rise. - Trey Jones and Simone Barraco signature - Heat treated cro-mo M8 6mm solid hex bolts - Cold forged & CNC machined 6061-T6 Alloy

The Odin stem features a 48mm reach and a 36mm rise. - Mark Burnett signature stem - Cold Forged & CNC Machined 6061-T6 Alloy - Heat Treated 6mm solid hex bolts

RR1.5 stems are designed with a low stack height and negative rise for road bikers looking to lower their handlebar position. They are made of high-grade aluminum to achieve the perfect balance of strength, stiffness and low weight. The body is 3D forged from an advanced 7075 alloy and the broad four-bolt faceplate design better distributes stress and lowers the clamping force required to secure the handlebar. - Designed for road use, but also suitable for mountain use - Forged and machined AL2014 body - 4-bolt face plate helps distribute clamping load - Corrosion-resistant Torx T25 steel bolts - Compatible with all 31.8 bars - 1 1/8" steerer - Includes stem top cap and bolt

FL1.5 stems are designed with a low stack height and negative rise for mountain bikers looking for a low handlebar position. The optimized aluminum construction achieves the perfect balance of strength, stiffness, and weight. 3D forged from 7075 alloy and a broad four-bolt faceplate design creates a better distribution of stress and lowers the clamping force required to secure the handlebar. - Designed for mountain use - Forged and machined AL2014 body - 4-bolt face plate helps distribute clamping load - Corrosion-resistant Torx T25 steel bolts - Compatible with all 31.8 bars - 1 1/8" steerer - Includes stem top cap and bolt - Lengths: 50-90mm - Angle: 6° flip-flop

• Forged aluminum • Single-bolt clamp • 180mm tall

• Steel • Polished-chrome finish • 1-inch model has 22.2mm quill, 15/16-inch model has 21.1mm quill • 10-inches tall (extra tall)

• Forged aluminum • 2-bolt clamp • 180mm tall

Sunlite's Adjustable Quill Stem puts your bars right where you want them. This wonderfully easy-to-use stem adjusts from 0 to +50 degrees—more than enough to help you find your ideal position. And, the 2-bolt clamp holds securely holds your bars.

• Forged aluminum • Classic streamlined shape • 2-bolt clamp • 180mm tall

• Forged aluminum • Anodized finish • 2-bolt clamp • 150mm tall

- 3D forged 6061 alloy road stems in 6 or 17 degree angles - Lightweight 4 bolt faceplate - Material: AL6061-T6 - Finish: Sandblasted

• Forged aluminum • 2-bolt clamp • 180mm tall

The Slab Stem uses a new design with minimal machining keep cost low and strength high. We also added our small brass badge for a unique style. This stem has a cold-forged body and face plate from 6061 aluminum for high strength, and the recessed top face offers a clean look with our fork preload bolt. - Weight: 11.2-ounce - Reach: 50mm - Stack Height: 30mm - Rise: 31mm (Upright) / 2mm Drop (Invert) - Clamp Bolts: 8 x 1.25mm hardened chromoly (x4) - Pinch Bolts: 8 x 1.25mm hardened chromoly (x2)

- Unique style, modern geometry, and rock solid construction, without the heavy price tag - Suitable for all disciplines: Freeride, All Mountain, Enduro - Chamfered bar-clamps to reduce stress risers and increase fatigue life in handlebars - Ideal for shorter riders to improve the setup of their cockpit. - Length (mm): 40 - Rise: 0° - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): ±170 - Finish: Shot peen anodized, laser logos

- Keep your steerer tube long without using lots of headset spacers - The classic look of a road race quill stem with a modern threadless headset - Polished silver with laser etch logo - 75 degree angle (-15 deg rise) - Clamp Diameter: 31.8mm (includes shims for 26.0mm handlebars) - Steerer Diameter: 1-1/8"

Salt Plus Manta stem. - Bar Clamp Diameter (mm): 22.2 - Steerer Clamp Diameter: 1-1/8" ins - Stem Type: Top Load

Precision 3D-Net shaped forged shaft interconnects with a precision broached clamp to create a strong, light, and secure stem offering +/-55 degrees range of adjustment. - Adjustable from +40 to -32 degrees - Stainless bar and stem clamp bolts

Proven time after time to be a reliable, easily adjustable system that continues to outperform the competition, the 4-Axis stem is a surefire go-to for an entry level stem that has world-class performance. - Bar Clamp Diameter: 31.8mm - Material: Alloy - Stem Angle: 30 degrees - S.H.I.S. Stem Clamp Diameter: 28.6

- C-220 degree extra-wide bar clamp improves stiffness and fits most riser bars - 3D forged 6061 alloy - 42mm steerer height with 41mm faceplate width - 142g (90mm)

Race Face's Ride stem is designed specifically for riders looking for Race Face engineering and quality at a value price point. - Forged and shot peened from 6061 aluminum for high strength and fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Machined logo on bar clamp

RaceFace's Chester 35 Stem is a practical stem with 2 length options and that legendary bomb-proof Race Face toughness baked right in. - Forged and machined from 6061 aluminum - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Stack Height: 42mm

Quill stems are awesome! Classic, effective, and unnecessarily sexy, just like a big feathery quill pen. And if a quill is good enough to write the Declaration of Independence, Hamlet, and Moby Dick, you can bet it's good enough for your bike. Finished with polished silver and available in a -17-degree or +30-degree rise, you can grab one that's just write (boom—punned) for your riding style no matter how relaxed or aggressively you ride! -22.2mm insertion diameter

A no-muss, no-fuss, four-bolt stem perfect for any threadless 1-1/8" steerer. Available with 25.4mm clamps, so whatever your dream bars, you can make 'em fit. - Choose between 80mm or 90mm reach (90mm is standard on our Original Series) - +-7 degrees - Threadless 1-18"

Origin-8's Classic Pro Quill Stem is crafted from light and durable forged 6061 aluminum with chrome-plated steel bolts. The handlebar clamp bolt is hidden for a clean look. This sweet stem has a polished anodized finish for durability and style. Different lengths are available for customizing the reach to your handlebars.

Origin-8's Classique Sport ATB Stem is crafted from light and durable forged aluminum. It features a 2-bolt handlebar face clamp for easy bar installation and removal. And it even has a built-in brake cable stop. This stem is 180mm tall from the bottom to top of the quill bolt so that you can raise and lower your bars (the bolt is hidden inside the vertical part of the stem). This is a nice choice for that classic mountain or touring bike.