Seatposts

- Designed using SRAM Exogram technology - Available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano DI2 seatpost battery within the SL Speed seatpost. (Sold separately) - Matte Black finish

Strong, yet light as a whisper, Zipp's Service Course SL is everything you could want in a seatpost. It's forged out of a single piece of tough 7075 aluminum, yet weighs just 220 grams. A low-profile clamp allows you to slide the saddle extra far back on the rails, giving you more room to optimize your position. The clamp even features downward-facing bolts for micro-adjustments to achieve that perfect fit.

#901 7/8 top 10" x 1" - Seat Post Diameter: 13/16'' - Seat Post Length: 15.5'' - Offset: 0mm - Clamp Type: Post mount - Seat Post Material: Steel

The Syncros Dropper 2.0 seatpost gives you the freedom to quickly switch from sprinting uphill or attacking down a descent with the simple press of the remote. Internal cable routing, infinite steps and 120mm or 150mm of travel round out this lightweight package. - Alloy AL7050 - 31.6mm diameter - 10mm Offset - Compatible from 7x7mm up to 7x10mm rails, carbon rails inclusive

- Forged aluminum - 7/8-inch seat-clamp diameter - 165 grams

• Forged aluminum • Integrated micro-adjust seat clamp

- Chrome - Sold individually

• Steel • Polished-chrome finish • 7/8-inch seat-clamp diameter

This replacement seatpost for the Tarmac SL7 ensures the perfect fit with two different setback options: 0mm and 20mm. - FACT carbon construction and aerodynamic profile compatible with the 2021 Tarmac SL7. - Setback: 0/20mm. - Sleek Di2 integration hides the Di2 junction box inside. - Cylindrical aluminum head assembly adjusts fore-aft and tilt with an easy-access single bolt.

This replacement seatpost for the Tarmac SL8 ensures the perfect fit with two different setback options—0mm and 20mm. - FACT carbon construction and aerodynamic profile compatible with the 2024 Tarmac SL8. - Setback: 0/20mm. - 20mm offset: 2-bolt micro-adjust clamp with 46mm saddle rail cradle enables an effective offset from 0mm to 20mm. - 0mm offset: Cylindrical aluminum head assembly adjusts fore-aft and tilt with an easy-access single bolt.

Our intention with Reverb AXS was inventive and pure: No hoses. No routing. No energy wasted. Not a single thing in the way of the experience. We created a reliable wireless-electronic dropper post and controller that actuates with drastically less effort and zero distraction. Expanding what's possible on a bike, Reverb AXS is enabled by SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - Effortless Electronic-Wireless actuation and infinite height adjustment with a single touch. - Clean, simple and fast to install. No hoses to route, no fishing required. - Updated internals for faster return speed in all conditions. - New Vent Valve Technology, a simple and reliable built in service solution without disassembly of the seatpost. - SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - Includes RockShox AXS handlebar controller, rechargeable SRAM battery, and charger.

Reverb AXS completes the AXS ecosystem by giving the rider customizable controls, easy install, and a shared battery, charger, and controller. Built for GX, X0, and XX riders, Reverb AXS ensures smooth control and reliability for every rider running a 100mm up to a 250mm dropper post, all with improved battery clearance. Features: - Travel options include 100mm, 125mm, 150mm, 175mm, 200mm, 225mm, 250mm - NEW air-over-air design that is more robust and durable - ActiveRide provides a compliant platform for technical E-MTB climbs when not in fully extended rigid position - Compatible with all saddle rail types (7x7, 7x9x, and 7x10) CONTROLLER SOLD SEPARATELY - Compatible with all AXS controllers

The intention with Reverb AXS was inventive and pure. No hoses. No routing. No energy wasted. Not a single thing in the way of the experience. RockShox created a reliable wireless electronic dropper post that actuates with drastically less effort and zero distraction. Expanding what's possible on a bike, Reverb AXS is enabled by SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - AXS technology allows for customization to an individual rider’s liking via the AXS Mobile App - Lower friction IFP allows for faster actuation of the post and less force needed - Vent Valve Technology allows for super simple service if the need arises without any disassembly of the post - Includes battery and charger, shared with all other SRAM AXS-enabled components - Required AXS Controller Sold Separately - System is completely water and dust proof to IPX7

Such Great Heights The budget-friendly Aeffect R Dropper Post is a rock-solid, shred-ready entry into the dropper post world. Designed right to keep you on the trails and out of the shop as much as possible, you'll wonder how you ever rode without one. It's What's Inside That Counts The brains of this dropper post are an extremely reliable cable-actuated hydraulic cartridge that delivers infinite adjustment within its travel. Simple Saddle Setup A user-friendly zero-offset seatpost clamp really cuts down on the time between setting up your saddle and ripping down the trail.

- Highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post - Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head - Angled clamp bolts allow easy tool access for hassle free adjustment and tightening - The rubber seatpost grommet fully seals the post to prevent water entering your seat tube - Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon - Wide lower cradle gives extra rail support for lightweight saddle rails - Narrow upper cradle increases the amount of forward/back saddle adjustment - Tilt Adjustment 6° up 12° down with Zero offset

Origin-8's Pro Fit Alloy Seat Post is made of light and durable forged aluminum that's been anodized and laser etched for a custom look. It also features an adjustable 2-bolt clamp that holds fast and lets you easily dial in your seat position. And, this fine post comes in a variety of diameters to fit almost any bike.

FSA's SL-K Seatpost is lighter and stiffer than ever! Using a UD carbon shaft with a bonded alloy head and a brilliant ITC clamp design, FSA has achieved what they believe is the finest seat post yet. The ITC clamp design allows you to adjust offset to 0mm or 15mm for fine-tuning your saddle position. - UD Carbon shaft, 2-bolt SBS alloy head, and chromoly hardware - Min. Height: 40mm

- Alloy seatpost with alloy bracket - Length: 400mm - 20mm offset

The newly redesigned EC70 Seatpost takes our superlight unidirectional carbon and applies our patent pending ISA technology - Independent Saddle Adjustment - which allows for completely independent fore-aft adjustment and saddle adjustment. With the 2 pitch adjustment bolts, the saddle angle gets locked into place as if you were adjusting limit screws, and unlike single bolt designs, you get adjustability and security. Available in 20mm Setback and Zero configurations. - Finish: Matte Black UD Carbon/Matte Black Head - Weight: Zero offset, 210g; Setback offset, 223g - Head offset: 0mm; 20mm - Length: 350mm w/ 80mm min. insert - Quill size: 27.2mm - Rail clamps: 7mm round; 7mm x 9mm oval (both included) - Material: EC70 carbon

ENVE's proven twin-bolt seatpost design refined for the modern road bike with seatpost battery integration capabilities. - Material: Carbon Fiber - Hardware Material: Titanium - Saddle Angle Adjustment: 0 – 27 degrees - Saddle Rail Compatibility: 7x10mm Carbon Rails / 7mm Round Alloy Rails - Torque Spec, Saddle Rail Clamp Bolts: 5.5Nm - Torque Spec, Seatpost Collar: Determined by your Frame manufacture/Seatpost Collar - Weight: 178g (25.4mm, 25mm offset), 168g (27.2mm, 0mm offset), 178g (27.2mm, 25mm offset)

ENVE's proven twin-bolt seatpost design refined for the modern road bike with seatpost battery integration capabilities. - Material: Carbon Fiber - Hardware Material: Titanium - Saddle Angle Adjustment: 0 – 27 degrees - Saddle Rail Compatibility: 7x10mm Carbon Rails / 7mm Round Alloy Rails - Torque Spec, Saddle Rail Clamp Bolts: 5.5Nm - Torque Spec, Seatpost Collar: Determined by your Frame manufacturer/Seatpost Collar - Weight: 210g (25.4mm), 204g (27.2mm), 204g (30.9mm), 204g (31.6mm)

Dimension Alloy seatpost. - 1-piece forged AL-2014 - Clamp Style: Standard Rails - Material: Aluminum - Max Height: 245mm - Min Height: 35mm - Weight: 250g

Dimension Two-Bolt Seatposts provide a sturdy and durable saddle perch for cross country and all-mountain riding in three diameters, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - 0mm offset

Crank Brothers' Cobalt 11 Seatpost utilizes the company's innovative design sense and cutting-edge materials for a post that is as stiff and light as it is beautiful. Its high-modulus carbon shaft trims grams and the single-bolt head allows for quick, precise seat angle and setback adjustments.

- Chromoly construction - Classic BMX Lay-back design - Material: Cro-Mo

- Designed using SRAM Exogram technology - Available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano DI2 seatpost battery within the SL Speed seatpost. (Sold separately) - Matte Black finish - Seat Post Diameter: 31.6mm - Seat Post Length: 400mm

The carbon Service Course SL seatpost is specifically tuned to be more shock absorbing than the "comfort" seatposts on the market, while still passing our strict internal MTB strength test. Flex engineered into the lightweight carbon tube keeps the rider comfortable over any terrain. Better fit means better performance, and if your saddle is out of position, you'll waste energy with every pedal stroke. The secure, two-bolt clamp makes for easy micro-adjustments of saddle position, and the head has been redesigned for maximum bolt-head accessibility. The Service Course SL seatpost makes it possible for nearly any rider to achieve the perfect fit, and the clamp works with all saddle rail types. - Distinctive Zipp cosmetics - Unidirectional Carbon fiber tuned for ride comfort - Lightweight clamping system - Lifetime warranty

On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored seatpost color is available on the Zipp Service Course Seatpost. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering, we are proud to offer redesigned Service Course seatposts. - Material: 6061 aluminum - 2-bolt adjustability - Minimum insertion length: 90mm

The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains. - Cable activated, hydraulic action, infinitely adjustable travel - Double key-way design prevents lateral twisting - Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails - Sealed cartridge internals for quick replacement - Low profile head-seal and saddle clamp increase useable travel

The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains. - Cable activated, hydraulic action, infinitely adjustable travel - Double key-way design prevents lateral twisting - Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails - Sealed cartridge internals for quick replacement - Low profile head-seal and saddle clamp increase useable travel