Skip to main content
Just in time for gravel season! Our Pinarello & Bianchi gravel bikes are on sale!!

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Shoes

$549.00 - $589.99 $549.99 - $589.99 Up to 7% Off
A brand-new road bike shoe in the Sidi lineup, the Shot-2 is light, aerodynamic, breathable, and well-performing. The upper is Microfiber TechPro and mesh. The Microfiber TechPro is eco-friendly with antibacterial and hydro treatment. Hydro treatment reduces water absorption. While the mesh provides great breathability and creates the ideal microclimate inside the shoe. A Comfort Fit Insole is provided for lightweight support. The new "C-Boost SRS" sole is born from the union of C, which indicates the chemical element Carbon, BOOST translation of push/support/support, and SRS Sole Replacement System. The C-Boost SRS sole provides excellent performance in the pushing phase. The special conformation of the metatarsal area allows greater power transmission on the pedals and guarantees ideal support. New oval holes, with an extra ± 5mm adjustment, considerably expand the positioning possibilities of the cleat which can be memorized by means of the usual millimeter scale applied. The carbon parts most subject to deterioration are protected by special SRS (Sole Replacement System) inserts in nylon and Thermoplastic Polyurethane (TPU) equipped with steel screws whose task is to reduce deterioration and at the same time extend the life of the resistance to abrasion while walking. The inserts are also integrated with ventilation holes that promote breathability inside the sole. The new "Double Tecno-3 Push Flex" rotor, entirely made by Sidi's R&D department (research and development center) together with the precious collaboration with sponsored athletes, completely eliminates the pressure zone on the instep and significantly improves the closure feeling. This system requires a smaller support surface on the tongue of the shoe and is equipped with a central flexing system capable of adapting to the different needs and conformations of the cyclist's feet, without creating areas of overpressure. Like its predecessors, it guarantees micrometric regulation, closing speed/tension release, and is replaceable. The all-new integrated heel is light and reinforced to avoid deformation after prolonged efforts and pressure. Thanks to its anatomically shaped structure, it stabilizes and supports the foot while pedaling, while the Reflex inserts offer greater safety on the road, with poor visibility conditions. As in the previous model, the Adjustable Heel Retention Device reinforces the spoiler, significantly improving the fit. Enjoy great traditional Sidi quality and construction.
$384.95 - $549.99 $549.99 Up to 30% Off
VENT CARBON SOLE - The VENT CARBON Sole features a light and replaceable heelpad in polyurethane to improve walkability and a replaceable integrated toe pad/vent cover. The key benefits of the VENT CARBON Sole are not only superior power transfer, because of its light weight and stiffness, but also warm weather comfort. The VENT CARBON Sole is designed with an integrated vent and air channels for heat dissipation and air flow. The vent can be opened or closed for 4-season comfort. The VENT CARBON Sole is handmade exclusively of carbon fiber in a weave pattern oriented at opposing angles that maximize stiffness while allowing for a small degree of controlled flex in the toe area. This carefully designed flex biomechanically relieves stress on the plantar tendon and helps promote circulation. The VENT CARBON Sole features a standard 3-hole drilling pattern, printed 10 mm lateral and fore/aft cleat alignment scale as well as the Look Memory Eyelet for easy cleat alignment and replacement. For triathlon, the vent also serves as a water drain, dramatically improving foot comfort after a wet transition. REPLACEABLE HEEL PAD - For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad. SHOT’s heel pad has a new design and it is very light. DOUBLE TECNO-3 PUSH - The DOUBLE TECNO 3 PUSH SYSTEM is inserted on a single base, this speeds up wearing and taking off shoes. The central mechanism creates a perfect tension balance between the shoe’s internal and external side. The symmetrical mechanism guarantees an excellent closure adapting on every instep. An innovative button added to the monofilament buckle, if pushed, lifts the buckle to facilitate the adjustment. REFLEX ADJUSTABLE HEEL RETENTION DEVICE - The ADJUSTABLE HEEL RETENTION DEVICE reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider’s heel. The heel retention device tightens the top of the heel cup so that the heel doesn’t slide out during steep climbs or sprints. Each side of the heel can be adjusted independently, for a perfect fit. For a custom adjustment turn the screw towards the + sign to tighten the heel retention device and towards the – sign to open it. Light weight, easy to use, and replaceable. For additional security while pedaling, the new adjustable heel device is provided with reflex inserts for more visibility in dark conditions. SIDI HEEL CUP - Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash.
$499.99 - $549.99
Upper: - Microfiber techpro matt Sole: - Vent carbon sole Technology: - Soft instep closure system 4 - Single tecno-3 push system - Tecno-3 push system - Adjustable heel retention device - Sidi heel cup - Replaceable heel pad
$549.99
Upper: - Vented microfibre techpro Sole: - Vent carbon sole Tecnology: - Soft instep closure system 4 - Single tecno-3 push system - Tecno-3 push system - Adjustable heel retention device - Sidi heel cup - Replaceable heel pad
$549.99
Upper: - Microfibre techpro Sole: - Vent carbon sole Tecnology: - Soft instep closure system 4 - Single tecno-3 push system - Tecno-3 push system - Adjustable heel retention device - Sidi heel cup - Replaceable heel pad Last: - Women’s specific
$524.99
Designed for our professional athletes, the Sidi Tiger 2S efficiently transfers all the power you can unleash while maintaining a high level of comfort, allowing you to focus entirely on the course. The Tecno 3 closure is strategically placed to prevent contact with other riders in crowded situations. The upper is made of Bioveg material derived from recycled microfibers with a plant based external finish. The MTB SRS Carbon sole harnesses the strength of interwoven carbon fibers for efficient energy transfer and its SRS technology allows riders to maintain maximum grip level at all times. -The Tecno-3 Push Flex completely eliminates the pressure zone on the instep and significantly improves the comfort of the closure -Like most Sidi small parts, the Tecno-3 System is serviceable and replaceable -The adjustable heel retention device reinforces the top of the heel cup, closing the back of the shoe securely so the heel doesn't slide out during steep climbs or sprints -The all new Sidi Integrated Heel Cup is light, comfortable and reinforced to avoid deformation -Each side of the heel can be adjusted independently for a perfect fit -The upper part of the toe section is protected with anti-slip rubber to resist and deflect impacts from stones or debris when cycling -The MTB SRS Carbon-Ground Sole raises the standard for mountain bike performance, dropping around 100 grams per pair compared to the previous Dragon Carbon SRS sole without sacrificing power or durability -The MTB SRS Carbon-Ground Sole consists of replaceable tread blocks in the toe and heel attached to a medium-modulus carbon sole -The Ground SRS treads and MTB Plate are easily removable and replaceable and the sole is toe-spike compatible -To improve walkability, Sidi cycling shoes include a replaceable polyurethane heel pad
$524.99
Designed for our professional athletes, the Sidi Shot 2S is crafted to deliver optimal power transfer while ensuring the utmost comfort, enabling athletes to stay focused on the road. Its carbon C-Boost sole harnesses the full strength of woven fibers, while the upper is constructed using Bioveg material derived from recycled microfibers and finished with an external plant-based coating. The innovative closure system is strategically positioned away from other riders, enhancing maneuverability in crowded situations. The adjustable heel retention mechanism allows you to secure the heel of the shoe, tightening the heel so that it conforms to any riders' heel shape. - The Tecno-3 Push Flex closure reduces the pressure zone on the instep and significantly improves the comfort of the closure  - The Adjustable Heel Retention Device reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider's heel - The heel retention device tightens the top of the heel cup so that the heel is secured during steep climbs and sprints. Each side of the heel can be adjusted independently for a perfect fit - The all new Sidi integrated heel cup is reinforced to avoid deformation after prolonged efforts and extreme pressure. Anatomically shaped, it stabilizes and supports the foot while pedaling - The C-BOOST SRS Sole is made of the latest generation carbon, designed to conform to the metatarsal area, increasing the transmission of power directly to the pedals, guaranteeing ideal power transfer and support - Oval holes extend the adjustment position of the cleat by ± 5 mm and a millimeter scale is included for determining the riders personal cleat position - Provided with SRS (Sole Replacement System) inserts in Nylon and TPU, with the function of protecting the carbon in the areas most subject to deterioration from use and for increased durability while walking - The SRS inserts are integrated with ventilation holes that promote the circulation of air inside the sole with each pedal stroke
$499.99
Our Supersonic Collection of products was developed with one thing in mind - pure race speed. When you're up against the clock or your fiercest rivals, know that you have the necessary products to break all barriers. Our ultra minimalist SCOTT MTB RC SL Supersonic Edition has an HMX carbon sole with a Corecell foam core for even more weight savings and ultimate power transfer. The dual-zone BOA Li-2 Fit System secures the Carbitex carbon fiber uppers for a highly conforming fit.
$499.99
Racers and Strava KOM junkies, come and see the light(weight)! When only the lightest, stiffest and most exotic will do, we have the shoe for you. Our ultra minimalist SCOTT Road RC SL Carbitex shoe is built on an HMX carbon sole with a Corecell foam core for even more weight savings. Dual BOA IP-1 dials secure the Carbitex carbon fiber uppers for a highly conforming fit that allows you to transfer all your energy to the pedals. - Zero loss of power - Extreme Stiffness - index 10 - Carbitex upper - HMX carbon sole - Ultra lightweight - BOA system w/ micro adjustment
$499.99
Our Supersonic Collection of products was developed with one thing in mind - pure race speed. When you're up against the clock or your fiercest rivals, know that you have the necessary products to break all barriers. Our ultra minimalist SCOTT Road RC SL Supersonic Edition shoe is built on an HMX spread tow carbon sole. A dual-zone BOA IP1 Fit System secures the Carbitex carbon fiber uppers for a highly conforming fit that allows you to transfer all your energy to the pedals.
$499.99
Upper: - Microfiber techpro matt Sole: - MTB SRS carbon-ground sole Technology: - Soft instep closure system 4 - Single tecno-3 push system - Tecno-3 push system - Adjustable heel retention device - Sidi heel cup - Rubber toe
$499.99
Drako 2S SRS is designed for athletes looking for maximum foot stability to unleash all their power. The ventilated carbon sole, with the innovative Firmor Lateral Support System, combines efficient power transfer with superb lateral stabilization of the foot. The dual rotor closure allows for a perfect individual fit, with added protection from mud and debris -The Soft Instep Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area -The central mounted Single Techno-3 Push mechanism guarantees balanced fit for every type of instep -Techno-3 Push System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The Adjustable Heel Retention Device reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider's heel -The heel retention device tightens the top of the heel cup so that the heel doesn't slide out during steep climbs or sprints -Each side of the heel can be adjusted independently, for a perfect fit -The reinforced heel cup stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer -The MTB SRS Carbon-Ground Sole raises the standard for mountain bike performance, dropping off about 100 grams per pair compared to the previous Dragon Carbon SRS sole without sacrificing power or durability -The MTB SRS Carbon-Ground Sole uses replaceable tread blocks in the heel and the toe - The Ground SRS treads and MTB plate are easily removable and replaceable
$499.99
The Sidi Wire 2S Road Shoes are engineered specifically for athletes who seek maximum foot stability when unleashing extreme power. Ventilated carbon sole with innovative Firmor Closure lateral support system suitable for athletes who need to combine power transfer with greater lateral foot stability. The specially designed dual-rotor closure offers the ultimate adjustment for the perfect level of lateral stability. -The Single Tecno-3 system creates a perfect tension balance between the shoe's internal and external side, and guarantees an excellent closure adapting to every instep -The Adjustable Heel Retention Device reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider's heel -The heel retention device tightens the top of the heel cup so that the heel is secured during steep climbs and sprints, each side of the heel can be adjusted independently for a perfect fit -Oval holes extend the adjustment position of the cleat by ± 5 mm and a millimeter scale is included for determine the riders personal cleat position -For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad. Wire's heel pad has a new design and it is very light -The Vent Carbon Sole is designed with an integrated vent and air channels for heat dissipation and air flow. The vent can be opened or closed for 4-season comfort
$499.99
Engineered specifically for athletes who seek maximum foot stability when unleashing extreme power. Ventilated carbon sole with innovative Firmor Closure lateral support system suitable for athletes who need to combine power transfer with greater lateral foot stability. The specially designed dual-rotor closure offers the ultimate adjustment for the perfect level of lateral stability. -The Single Tecno-3 system creates a perfect tension balance between the shoe's internal and external side, and guarantees an excellent closure adapting to every instep -The Adjustable Heel Retention Device reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider's heel -The heel retention device tightens the top of the heel cup so that the heel is secured during steep climbs and sprints, each side of the heel can be adjusted independently for a perfect fit -Oval holes extend the adjustment position of the cleat by ± 5 mm and a millimeter scale is included for determine the riders personal cleat position -For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad. Wire's heel pad has a new design and it is very light -The Vent Carbon Sole is designed with an integrated vent and air channels for heat dissipation and air flow. The vent can be opened or closed for 4-season comfort -The women's specific fit is narrower across the ball of the foot and features less volume inn the instep area and a narrower heel cup
$495.00
Step into Wølfgar, the world’s most advanced winter cycling boot. We’ve combined decades of winter cycling experience with NASA-grade insulation materials for a boot that keeps feet warm and dry down to -25ºF. Wølfgar is a boot worthy of singletrack sessions or multi-day expeditions in the harshest winter weather. - Our lightweight three-piece proprietary bottom assembly is compatible with both flat pedals and 2-bolt cleats, and features a rubber outsole with microglass lugs for traction on ice - Waterproof materials and construction keep the elements out, while aerogel under the foot and over the toe block frigid air - On the inside, Wølfgar’s reflective thermal lining retains warmth, and a removable wool and faux-fur liner wicks moisture and insulates
$400.00 - $450.00
Perfectly fitting with maximum ventilation, class-leading comfort, and unmatched power transfer, the Infinito R1 Knit road cycling shoe delivers ultimate race performance. Infinito R1 Knit is the first knitted pro cycling shoe ever. Along with its unique knitted material, the all-new Infinito Closure System, superior stiffness, weight-saving materials and the intelligent implementation of new technology make it the pinnacle of performance road shoe design. The knit material is highly breathable, for superior temperature management and enhanced comfort. It is extremely light yet strong and supportive and looks amazing and dynamic. With Dynamic Arch Support technology’s structure and the Increased Volume Control system, which shapes the whole shoe’s upper directly around the foot’s profile, Infinito R1 Knit fits any rider precisely, easily and comfortably. The Infinito Closure System uses two micro-adjustable double Boa IP1-B dials with steel-coated nylon laces in an infinite configuration that adjusts the upper on the forefoot. The textile guides eliminate pressure points, providing optimum adaptable comfortable fit for high-power, high-intensity riding. It harmonizes with the new mesh footbed insole for the best possible ventilation and enhanced comfort. Its laterally stiff, light, Uni Direction Full Carbon Outsole is ventilated for maximum temperature control, and designed for ultimate power transfer from any riding style. Infinito R1 Knit is fi’zi:k’s range-topping shoe, and benefits from the latest technologies, materials and improved design based on feedback and input from some of the world’s leading pro riders. - Materials: Unique new Knitted Material - Outsole: Full UD Carbon Vented - Closure system: Double Infinito IP1-B - Insole: Infinito footbed - Weight: 255g (size 42.5)
$450.00
Supremely engineered for your fastest efforts. With its ultra sleek lines, optimal power transfer, and refined pro-grade features, the RC903 is the culmination of our most advanced technologies for a performance elevating race shoe that feels and functions unlike anything you’ve worn before. Features: - Premium Road Cycling Shoe: S-PHYRE RC903 is a high performance road racing shoe compatible with SPD-SL cleats - Precise Fit: dual low-profile BOA® Li2 dials deliver quick and precise micro-adjustments - Optimum Stiffness: reduces energy loss and maximizes power transfer - Anti-twist Heel Cup: stabilizes heel to help manage the intense twisting forces caused by explosive acceleration - Breathable Shoe: lightweight micro-fiber leather upper with perforated venting keeps feet cool during even your sweatiest pursuits - Cleats sold separately BUILT FOR PERFORMANCE Anti-twist stabilizing structure within the heel cup offers unparalleled stability during explosive sprints. DYNALAST technology secures your foot in place, reducing power loss at the pedal and lessening fatigue during long rides, while the optimized toe-spring section reduces tension in your feet, calves, and hamstrings - so you can go further, faster. EXCEPTIONAL FIT How a shoe fits and feels defines its performance. The RC903 takes both to the next level with a 360º surround wrapping upper, a refined toe box fit, and a low-profile crossover lacing pattern with two BOA® Li2 dials for the most precise fit possible.
$450.00
Supremely engineered for your fastest efforts. With its ultra-sleek lines, optimal power transfer, and refined pro-grade features, the S-PHYRE RC903 Women’s is the culmination of our most advanced technologies for a performance-elevating race shoe that feels and functions unlike anything you’ve worn before. Unrivaled speed Features: - Premium Road Cycling Shoe: S-PHYRE RC903 Women’s is a breathable, high-performance SPD-SL road racing shoe - Precise Fit: dual low-profile BOA® Li2 dials deliver quick and precise micro-adjustments - Optimum Stiffness: reduces energy loss and maximizes power transfer - Anti-twist Heel Cup: stabilizes heel to help manage the intense twisting forces caused by explosive acceleration - Women’s Sizing: designed with a women’s specific last for a natural, comfortable fit. - Cleats sold separately BUILT FOR PERFORMANCE Anti-twist stabilizing structure within the heel cup offers unparalleled stability during explosive sprints. DYNALAST technology secures your foot in place, reducing power loss at the pedal and lessening fatigue during long rides, while the optimized toe-spring section reduces tension in your feet, calves, and hamstrings - so you can go further, faster. EXCEPTIONAL FIT How a shoe fits and feels defines its performance. The S-PHYRE RC903 Women’s takes both to the next level with a 360º surround wrapping upper, a refined toe box fit, and a low-profile crossover lacing pattern with two BOA® Li2 dials for the most precise fit possible.
$450.00
From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156
$449.99 - $450.00
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$449.99
Our Supersonic Collection of products was developed with one thing in mind: pure race speed. When you're up against the clock or your fiercest rivals, know that you have the necessary products to break all barriers. Our ultra-minimalist SCOTT MTB RC SL Supersonic Edition has an HMX carbon sole with a Corecell foam core for even more weight savings and ultimate power transfer. The dual-zone BOA Li-2 Fit System secures the Carbitex carbon fiber uppers for a highly conforming fit. - Unique and limited-edition design - Extreme stiffness index 10 - Carbitex upper - HMX carbon sole - Dual BOA Fit System
$449.99
The iconic design that gave birth to our first cycling shoes over 60 years ago meets modern materials to create our lightest racing shoes. Designed to retain all support and strength, the Sidi Sixty offers the ultimate fit in a pair of racing shoes for cycling. -The Sidi Tecno-4 Push System has a single rotor to reduce the shoe's weight and guarantees the precision of a micro-metric closure -The Adjustable Heel Retention device reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider's heel -The heel retention device tightens the top of the heel cup so that the heel is secured during steep climbs and sprints, each side of the heel can be adjusted independently for a perfect fit -The Vent Carbon Sole is handmade exclusively of carbon fiber in a weave pattern oriented at opposing angles that maximize stiffness while allowing for a small degree of controlled flex in the toe area -The Vent Carbon Sole features a standard 3-hole drilling pattern, printed 10 mm lateral and fore/aft cleat alignment scale for easy cleat alignment and replacement -The key benefits of the Vent Carbon Sole are not only superior power transfer because of its light weight and stiffness, but also warm weather comfort -For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad
$449.99
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$449.99
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$449.99
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$425.00
When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced toungless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features-Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)
$425.00
When the moment comes for an attack in the hills, a long solo move, or a full-gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, fewer injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)
$424.99
When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world’s best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It’s 1% faster than any shoe we’ve ever made, and at the finish line, that’s all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features—Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)
$419.99
Make no compromises Simply our fastest, most advanced mountain shoe ever. The XXX mountain bike shoe was designed for those that demand the most of themselves and their equipment. It's the exceedingly light, stiff, zero-compromises trail shoe for XC and CXC racers that value efficiency, minimal weight and maximum stiffness. Product details - inForm Pro last delivers an ergonomically optimized, high-performance fit - 100% OCLV carbon sole is extremely lightweight and stiff for efficient power transfer - Dual, independent Boa IP1 dials for precise, zone-specific fit adjustments - Lightweight and luxurious TPU upper material for supportive comfort and perfect perforation pattern for breathability - Stiffness index 14 of 14 - Asymmetrical design and superior lace routing system reduces top-of-foot pressure while providing a more secure fit - External heel cups and no-slip heel lining prevent slippage and chafing while reacting to your movements more quickly - Durable GnardGuard outer material protects against abrasion and fights debris
$419.99
Ride what the pros ride The most sophisticated road cycling shoe on the planet. XXX is professional grade from heel to toe. It's meticulously constructed of the most luxurious materials available, and renowned for its tailored fit and unparalleled pedaling efficiency. This attention to detail has made XXX one of the most sought after race shoes by the world's best riders. Product details - inForm Pro last delivers an ergonomically optimized, high-performance fit - 100% OCLV carbon sole is extremely lightweight and stiff for efficient power transfer - Dual, independent Boa IP1 dials for precise, zone-specific fit adjustments - Lightweight and luxurious TPU upper material for supportive comfort and perfect perforation pattern for breathability - Stiffness index 14 of 14 - Asymmetrical design and superior lace routing system reduces top-of-foot pressure while providing a more secure fit - External heel cups and no-slip heel lining prevent slippage and chafing while reacting to your movements more quickly - Neoprene pads at top of the tongue reduce pressure against dorsal tendon for better mobility
Page 1 of 12 Next page